Wooden Cross Flow
Range 1000 CMH. to 4000 CMH. Per Cell
Timber Counter Flow
Range 1000 CMH. to 4000 CMH. Per Cell
FRP Round Bottle Shape
Range 10 TR. to 400 TR. Per Cell
FRP Square Type
Range 10 TR. to 500 TR. Per Cell
RCC Cross Flow
Range 1000 CMH. to 4000 CMH. Per Cell
Nozzels
NJX uses polypropylene nozzels which are non-clogging and ensure low pressure water distribution system, which is the key for uniform distribution of hot water for efficient cooling. There are several designs and sizes of nozzels depending upon the size and type of cooling tower.
Flow Control Valves
It is a very important part of the water distribution system. Hence NJX ensures that the control valves are machined with high precision. Flow control valves have a cast iron body, stainless steel spindle and neoprene rubber gasket.
Drive Shafts
NJX drive shaft are hot dipped galvanized. We also supply stainless steel drive shafts depending upon applications.
This drive shafts are fitted with flexible coupling to avoid misalignment.
S. S Grids
Since the whole load of the falling water as well as the weight of fills is born by the grids alone. NJX grids are made of high quality S. S wire to give enough strength and full service life of the cooling tower.
Fan Hubs
Fan hubs are made of high quality cast iron which serves the full life of cooling towers by us.
We also supply plate hubs suitable for certain applications.
Gear Boxes
NJX gear boxes have a 90 degree angle with respect to the shaft which is always horizontal. These gear boxes have a cast iron (ASTM-class20) body which is stress relived. The gear math sets and bearing used by NJX match international standards.
Axial Flow Fans
NJX fans are designed in such a way that maximum quantity of enthalpy rich air (Hot Air) is blown off in the atmosphere; that too with the minimum consumption of power.
PVC Fills
NJX supplies PVC fills in various design to ensure efficient heat transfer from hot water without increasing the energy requirement of fan.
For further queries, feel free to contact us.